Even at the outset, you should know that installing LED & Neon below Car Lights will require a tool kit and accessories consisting of an electric drill with drill bits, screw drivers, a marker, a center punch, electrical wire-strippers for joining wires, soldering gun and solder, heat gun and silicon sealant.

Before undertaking any electrical work on your car, you must disconnect the car battery as a safety measure. This can be achieved by disconnecting the car’s negative battery cable. Identify the place where you wish to mount the LED/Neon hardware. While drilling holes in the car body make sure, you do not pierce or damage any critical areas such as brake lines, fuel lines and electrical lines that can lead to avoidable repairs.Decide on a place for installing the tube, which should far removed from all fuel lines, exhaust systems, areas prone to heat, moving parts, spots where a lift jack will be used to raise the vehicle etc. With the car raised up on a lift or jack, try the LED light tubes in the locations where you expect to mount them. Strictly follow the kit diagrams and instructions. It is suggested to mount the led tubes centrally for optimal appearance.

The LED tubes should be mounted on the car chassis using the small metal/plastic brackets that are in the kit. Install the brackets on the tube and use the assembly to mark the locations where you will be drilling the holes with an ink marker and center punches them to help your drill bit. Carefully drill the holes for the mounting brackets and apply a small amount of silicon sealer to the holes before screwing in the screws. This is to avoid formation of rust. Initially, tighten the screws just enough to hold the bracket in place and then individually tighten each screw go completing the installation.

Identify a suitable location for the distribution block to be mounted on a flat surface in the engine compartment. However, it should be mounted away from extreme heat and all moving parts. Then connect each tube to the outputs on top of the distribution block. There are many wire extensions available in the kits from, in case the existing wires do not reach.

Thereafter, decide on a location inside your car to mount the digital control panel. You should choose a location wherefrom you can easily access buttons and functions.

The ribbon wire on the digital control panel has to be pushed through a hole in the firewall and plugged into the Input on the side of distribution block.Finally, the power wire on the digital control panel should be connected directly to the Positive side of the car battery with an in-line fuse a little away from the battery. The Earth wire or Negative ground wire coming out from the control panel that will need to be securely fastened to the car chassis.

Please bear in mind that the authorities resent installing neon or LED car lights on your cars. To avoid any possible fines, it is best to have the neon or LED lights activated through a separate button instead of having them glow simultaneously when the headlights are turned on. For this, you can run a power wire directly from the car battery to the kits operating switch, completely bypassing the car’s headlight wires.

Labels: Custom Neon Signs, Neon Advertising Signs, Neon Business Signs, Neon Clocks, Neon Lighting, Neon Lights, neon sign, Neon Wall Clocks, Tatoo Neon Signs

As is known to many, neon signs are nothing more than some colorful display made of gas-filled glass tubes and bent into the shape of letters or decorative designs of one's choice. If a high-voltage electrical current is passed through the gas, the tubes emit glow and brightens the place. Several different types of gases are used in neon tubes. Neon Signs have become tremendously popular ranging from a small advertising sign to massive displays outside huge shopping complexes - particularly bars, restaurants and casinos.
Although neon gas was originally used in neon signs, today usage of neon gas is restricted to producing reds and orange hues only. The latest process involves using either argon, or an argon-neon mixture, for making neon signs. To increase the intensity of the light or to produce a concentrated blue light, some people add a small amount of mercury to argon and the effect is truly brilliant. Experts suggest that optical tints in various colors may also be used and Xenon, krypton, and helium gases can be used for special color effects.

The glass tubing used in neon signs is made of soft lead glass, so that it is capable of bending easily for making different designs. The electrodes used in each end of a section of illuminated tubing are made of virgin iron surrounded by a cylindrical glass jacket with one end open. A wire is then attached to the metal electrode and made to pass through the closed end of the glass jacket. The closed end is sealed into the end of the sign tubing while the open end is left protruding into the tube.

High voltage electricity required to power the Neon Sign comes from a transformer, which converts the 120 volts from the electrical lines to as much as 15,000 volts for the sign... The wire is connected to the transformer through an insulated housing made of borosilicate glass with a spring connection on one end. The transformer and wires needed for neon signs are available in the market.

Manufacturing neon sign is both an art and a technical process. Imaginative designing is necessary to make each sign unique and look different and to suit the desired display. Neon signs must be made to exact size keeping in mind the available installation space. Manufacturing neon signs, simply stated, consists of bending the tubing and attaching the electrodes, removing any impurities from within the tubing, then evacuating the air and adding the gas. High quality raw materials and meticulous manufacturing processes are required to produce a colorful and truly appealing neon sign. Please note that all neon signs must meet the requirements of the Underwriters Laboratories to obtain a UL listing. They will be required to undergo a series of tests by independent testing agencies. Neon Signs must also meet the requirements of the National Electrical Code and outdoor signs must particularly comply with local building codes in their construction and wiring.

The latest Neon Sign designs include small, electronic transformers that eliminate the annoying audible hum of older designs. Neon signs that blink or neon signs that deceptively appear to move are regulated through programmable electronic controls.

Labels: Custom Neon Signs, Neon Advertising Signs, Neon Business Signs, Neon Clocks, Neon Lights, Neon Signs

Fixing of neon light repairs is a thankless job although it appears simple involving nothing more than a couple of bends, a few welds and a tube re-pump. But people who have actually fixed neon light repairs know that the actual task is quite complex entailing dissembling, cleaning, scraping, glass cracking and chipping, reeking smoke and lot more. There is no denying that Neon Sign have a unique appeal, and serve as items of marvel in homes, retail outlets and business establishments all over the world. You may be aware that neon signs are of high voltage - running on between 5,000 and 12,000 volts of electricity. In view of this, neon repairs should only be undertaken only by those comfortable working with high-power electrical wiring. Due to wide usage of both new and vintage neon signage, there should be no difficulty in procuring replacement parts.

The tools you will require to conduct neon sign repairs include needle nose pliers, replacement neon tubing, thin flexible metal wire and cutter and transformer replacement unit.

Ascertain if the neon tubing is broken by gently jiggling the tubing. If you notice breaks or even hairline cracks, remove that particular affected section of tubing This can be done by slowly unwinding the mounting wires either manually using your fingers or the needle nose pliers. Replace the damaged section with a new length of tubing made to match with the old one.

Quite often, Neon Light repairs may be because of failed transformer unit. Test the transformer unit to find out if current is passing through the transformer and is reaching the tubing. Disconnect the transformer wire leads from the tubing mount by removing the outer rubber casing, and unwinding the wires that are twisted together to make the connection. Hook the transformer to a piece of good tubing and if it does not illumine, then a failed transformer is the cause. Buy a replacement transformer.

You must check the cord for any signs of wear, breaks or other types of damage. Cords can be obtained easily from neon supply companies and they are quite inexpensive. Replace the damaged cord to freely carry the voltage that your sign requires.
Whenever you feel like brightening the neon sign, have a neon repair shop cut and then refill the neon tube with fresh neon gas and reseal the tubing. This is an economical way of giving fresh life to your neon sign than casting away a dimmed sign as useless.

Here is a bit of general advice - in order to render Neon Light repairs more trouble-free, make a pattern using the remaining tube. Because quite often, the original pattern or design may not be available and if you break the only remaining section of a sign, you will regret not having made a pattern.

Please note that no neon sign repair is complete unless you thoroughly inspect all the associated components - insulators and wiring, transformer and tube supports and electrode housings, chains, nuts and bolts, amongst others. It is essential you patiently check every sign item for rust, electrical arcing, even blocked air vents and plugged water drain holes wherever applicable. This complete item-by-item checking alone will assure you that the neon repair work undertaken is purposeful and lasting.

Labels: Neon Beer Signs, Neon Business Signs, Neon Lighting, Neon Lights, Neon Signs

Neon Sign Technology

Neon sign technology has made its impact since 1675 before the age of electricity, though the cause of the light was not understood during that period. Later, scientists were able to invent many forms of lighting when the electricity principles were discovered. Many types of electric discharge lamps or vapor lamps were invented during 1900.

Georges Claude is the inventor of the First Neon Lamp. The word neon was derived from the Greek word "neos’ that means “new gas." By 1923, Georges Claude and his French company Claude Neon, introduced neon gas signs.

Neon signs are excellent advertisement means for promoting your business or product or idea. Neon signs can attract more customers to your business through their attractive look. Neon signs can be fixed at the entrance or inside of your office. They are highly effective and visible during both day and night time.

• Neon Bar Signs


• Economical Neon Signs


• Neon Beer Sign


• Neon Patriotic Sign


• Neon Famous Brand Sign


• Neon Sports Sign


• Neon Custom Sign


• Open Neon Signs


• Economical Neon Signs


• Claude Neon Signs. etc..

Business Neon signs are extensively used by business people to advertise and promote their goods and products. Beer neon signs are excellent choice for bars and restaurants. Business Neon signs can be used at night clubs, ice cream parlors, pharmacy, bars, theatres, lounges, grocery, restaurants, cafe, bakery, hotels, hospitals, auto repairs shops, sports training centers, shopping arcades, martial art training centers, massage clinics, music and video shop, beauty clinics and hair styling shops, pawn shops, photo studios, etc. Custom neon signs can meet your personal or business needs. You can choose your own custom neon signs. Custom neon signs provide you the advantage to choose the size, text, font, style, borders, colors and images of the custom neon signs.

• Red Dog Beer neon sign
• Budweiser Frog neon beer sign
• Corona neon beer sign
• New Phoenix Suns Budweiser Neon Light Beer Sign
• Guitars Weapon Band Rock Bar Beer LED Neon Sign
• New Los Angeles Lakers Budweiser Neon Light Beer Sign
• New York Rangers Real Neon Light Beer BarSign

• Beer Mug Neon Sign
• Custom Game Room Neon Sign
• Custom Cocktails Glass Neon Sign
• Custom Margarita Glass Neon Sign
• Custom Diner Coffee Cup Neon Sign
• Custom Acoustic Guitar Neon Sign
• Custom Race Car Neon Sign
• Custom Flashing neon sign

Labels: Custom Neon Signs, Neon Business Signs, Neon Signs

Neon Signs Product

It is usually difficult to find the right gift for your friends and relatives. Amazing neon based products available in retail stores and online stores can make wonderful gift for your friends and relatives. If you like to gift a special and unique gift for your friends or relatives, you can choose a neon sign. Neon signs are one such neon based product which can really be a memorable and unique gift for your loved ones. Neon sign can be a personalized gift that will show how well you have understood your friends or relatives.

They are highly visible and are more effective even during night time.

• Neon Bar Signs


• Neon Beer Sign


• Business Neon Signs


• Neon Patriotic Sign


• Neon Famous Brand Sign


• Neon Sports Sign


• Neon Custom Sign


• Open Neon Signs


• Economical Neon Signs


• Claude Neon Signs. etc..

• Customization Level
• Size
• colors

Neon signs are available in different varieties of designs and themes. You can choose from the list of beers, automobiles, drinks, card games, Famous Brand, sports players, Patriotic persons, etc. You can choose the design and theme based on the interest of the person to whom you are gifting the neon sign.

You can also request for custom neon signs with catchy or funny phrase to increase your beloved persons’ curiosity. Custom neon signs are really a great gift option. You can gift a custom neon sign made with the logo of your friend’s or relative’s favorite sports team, personality, drink or anything. Custom neon beer signs will make a decorative gift for a person who has a bar. Custom neon signs are better gift option since you can choose the images, messages, and colors and font of words.

When you choose a neon sign, make sure that the colors used in the sign are noticeable and pleasant to the eyes. Also give more importance to the color and brightness of the image used in the sign instead of the name or message in the sign.

Neon signs are energy efficient and durable, and hence will not bore your friends or relatives when got as a gift.

Labels: Custom Neon Signs, Neon Advertising Signs, Neon Business Signs

Neon signs were invented by a Frenchman, named Georges Claude in the year 1910. It entered American shores in the year 1923. "Neos" in Greek means "new gas". Only after the invention of traditional electric bulbs & lighting, neon lighting had come into existence. From businessmen to ordinary customers, all of them opted for neon signs. Today, the promotion of a product without neon signs is a fact hard to digest. Neon signs have come to stay & get noticed.

Neon signs are always a must for any business concern, mainly because they are priced very low & are affordable. The bright colors in the signs easily attract the customers. All products, ranging from pin to plane, eraser to engine - are sold using the display of neon bar signs. Using custom neon signs, today's commercial outlets, promote their business using the display of most colorful electronic message sign boards. These boards display the company's name in bright colors. After 6 P.M., if the exposure is required, neon signs are the best option.

Neon Signs in Motel
Neon Signs in Bars
Neon Signs in Restaurant
Neon Signs in Discotheques

The main reason why most business organizations use neon & LED is because, they want more business. The customer can view your business organization from a far away distance at any angle. The customer gives you business as he enters your organization on seeing the neon sign. The customer then gets attracted to your organization once you use your communication skills. Indirectly, you have inherited help from these neon sign boards.

Neon LED Signs

• As they are made up of tough plastic, they cannot be broken easily.


• You will be able to save a lot of money as you don't have to buy new lights every
  time.


• The energy consumed by electricity is also very little & hence, you
  can save a huge sum on those electricity bills.


• As they consume less electricity, the energy is converted to heat. And, in this way, electricity is saved as a precious & required source.


• They give you improved brightness & last long
  

Looking back at all these factors, we can surmise that neon signs provide the best source for promoting business ventures.

Labels: Neon Advertising Signs, Neon Business Signs, Neon Lighting

Labels: Neon Advertising Signs, Neon Business Signs, Neon Signs

The use of neon lights has proved over the years to be a successful and yet an economical method for enhancing the publicity of a product or services, contributing to the enlargement of client base. Companies are readily coming forward to invest in neon signs as it is an assured way of arresting public attention for their products and services.

As is well known, the electrical consumption of neon lighting is very low compared with other type of lighted advertising which means reduced operational costs. Another big advantage of neon is customization for you can choose the shape of lamp, specific colors and desired size. This apart - neon is capable of a range of designs, as opposed to other standard light fixtures and traditional lamps.

Neon can also be used extensively as part of a larger marketing campaign to highlight the features of products manufactured by the corporate world. As a matter of fact, it may not be an exaggeration to say neon can create a terrific impact on the customer more than even advertising over radio, television, or newspaper can do. Businesses should seriously consider investing in neon signs as a part of a long term marketing strategy.

Neon signs can be purchased at an affordable price, they are easy to maintain, environment friendly and can be programmed to display different messages. Neon signs lend a certain touch of class to any business outlet and make the place more alluring to a visitor.

LEDs are of course a technology in its development process and neon is widely used for lighted advertising purposes across the world. Neon is a technology that has today become commonplace and can be customized for any application - a bar, a retail stores, a road-side shop, a restaurant, any commercial establishment and verily for many more such business outlets. Since neon is customizable, the prospective buyer can legitimately expect to install some fascinating neon signs of extraordinary workmanship at his place and towards this end, would want to locate a reputed neon shop.

When selecting a neon company, verify if they have some referrals from satisfied customers. Sometimes it is extremely difficult to determine if the bends in the glass are solid and strong and not flat. The neon should also be even and steady and not uneven. Ascertain what type of pumping system the company uses as good workmanship is possible only with good pumping systems.

Marketing professionals have veered round to the view that neon has a very low purchase price, the operation costs are negligible, but has a huge cost benefit ratio. Some imaginative marketing persons are also adding some animation to the neon signs for luring wider audience attention. In the commercial world, successful marketing means innovative strategies for creating publicity and neon signs are taking the world by storm.

Labels: Neon Advertising Signs, Neon Business Signs

Market is flooded with neon-based products which can be considered to be gift-articles. A good number of neon signs are inimitable in style & shape and can be cherished in our memory. Neon signs can adorn any room. They can be bought by any person. Price tags vary from article to article. They will suit the budget of all - be rich or poor - the lowest price being around $50. The pricing is based on three factors - the level of customization, its size & its color.

Neon clocks will fit in any room & look sleek & stylish. They are available in different varieties - automobiles, drinks, card games, beers & many more. Neon world offers multifarious gift articles – posters, LED stars, pin-ups of 50's, moving neon signs, stands & sculptures. The list is ever-growing & awe-inspiring.

Publicity has to be creative to catch the attention of the public. The investor has to think a lot about product production campaign. The creative mind has to lay special emphasis on the visuals & imageries, interspersed with punch-lines & catch-phrases. The logo should be prominent but not irritating. The colors should be noticeable but not gaudy. People respond to visual treatment but not to verbal pyrotechnics. By placing neon signs in seemingly-unimportant locations, customers will be tempted to have a look on the product. Neon signs should show the direction of the shop to facilitate potential customers.

Neon signs & marketing techniques have created great impact on the people. Las Vegas & Tokyo City are two metropolises which are known for their superlative publicity. Neon clocks
are very attractive pieces. Its body is made up of metal or plastic depending upon the usage. They are generally powder-coated to insure durability. Neon is powered through a lightweight neon transformer with an on/off switch. Due to this device, neon can be switched off without stopping the clock.

The clock works on AA battery or some other power source. Retail outlets use neon clocks. Nowadays, neon clocks are also used at homes. Children are fond of these clocks. These clocks can be arranged in children’s bedrooms, washrooms, kitchens or drawing rooms. Pictures of animated movies like Ice Age, Finding Nemo & Madagascar inside the clock. Of late, these clocks are made as per customer’s specifications. Clocks are coming with pictures of famous brands inside like Coca Cola, Jack Daniels Whisky, Harley Davidson, NFL pictures, etc.

Small clocks find their place in homes & larger ones are found in public places. They are made in different colors. Green glow can be acquired from a mixture of Neon & Krypton. People want to have attractive interiors. They want to own designer lights & neon clocks at home. With less expense, neon clocks impart special attraction to your room, cubicle, kitchen, living room, bathroom, etc.

Neon wall clocks are sold in a wide range of neon tube colors to match you wall, company logo, etc. They come in different sizes. The common piece has twelve-inch to seventeen-inch diameter. They range from ultra wonder to classical in appearance. They are used in gaming rooms & billiard halls. Diner's cafe & restaurants display neon wall clocks with food & beverage brands like beer, coffee & ice-cream trademarks. Custom neon clocks are manufactured by certain companies in USA. Expenditure will be double, exorbitantly high.

Labels: Neon Advertising Signs, Neon Business Signs, Neon Clocks, Neon Wall Clocks

No matter what kind of tattoo you prefer, make sure to find a design that adequately conveys your message. Make it a point to visit the tattoo parlor in your town, and check out the designs and talk with the tattooist.

Apart from being a piece of decoration, the one common reason for getting tattooed seems to be it was used as an Identification mark of the wearer's status in a group. Different tattoos were said to represent different meanings. The designs of tattoo were expected to reflect one’s personality. For instance, if a person has a child's tattoo done on his hand, it spoke of that person’s innocence. Fish tattoo represented health and happiness. Fists, denoted vindictiveness or thirst for revenge and roses strangely did not symbolize charm or fragrance but a life full of thorns. Snake represented sin and tigers indicated boldness and brutal savageness.

Irezumi is the Japanese word for tattooing, and people who see the bold colorful designs of Japanese tattoos, will be able to recognize them anywhere! The art style used is very similar to the art that appears on Japanese woodblock prints and truly reflective of Japanese culture. Japanese designs can be very large, covering up whole limbs, and in some cases, the entire body.

With regard to Tattoo Neon Signs, it is believed they can lure a larger audience and fetch more customers. Tattoo artists are attempting to promote their artwork with the help of neon. Many people use neon to effectively advertise who they are and what they do. Neon signs will make your studio stand out to invite customers wanting to get tattooed.

Neon signs are popular forms of expression to adorn arms, legs and many other body parts. By displaying neon signs and LED signs for your tattoo or piercing business, you demonstrate the imaginative designs that people search out for. The shapes and sizes are countless and you can pick simple lines or more complex designs to fit your personal taste. The fonts can be teasing or serious and the extras like animation or flashing images can enrich the adornments you provide your customers. It is an acknowledged fact that Neon excites people and LED delights everybody.

Tattoo neon sign is a medium that will not only attract attention but speak volumes about your mastery of the art. Assuming you are a tattoo artist who works hard on your craft, you can effectively promote your artwork with the brilliance and splendor of neon. A tattoo neon sign is guaranteed to promote your studio 24/7.

Labels: Neon Advertising Signs, Neon Business Signs, Tatoo Neon Signs

With the advancement of technology, today many other gases other than neon gas are used in the manufacture of neon signs. As a matter of fact, the most commonly used gas nowadays is Argon, or an argon-neon mixture. Pure neon gas are seldom used – although the nomenclature ‘neon signs’ remain. To enhance the intensity of the light, some manufacturers add a small amount of mercury to the argon to produce a powerful blue light.

To offer a wide array of bright and sparkling colors, manufacturers coat the glass tubes with a variety of tints and phosphor. Optical tints in various colors are also used and the glass at times is left clear without any tint, to create a strong blue light. Manufacturers also use xenon, krypton, and helium gases for bringing out special color effects.

Neon signs have very wide range of applications – a small advertisement to huge complicated designs as many businesses have begun to realize cost-effectiveness of neon sings as advertisement material.

It may be worthwhile to know that the glass tubing used in making neon signs is soft lead glass which is capable of being bent to shape. This glass is generally available in lengths of four to five feet and with varying diameter all below one inch.

Further, the electrodes in each end of the illuminated tubing are made from virgin iron surrounded by a cylindrical glass jacket having one end open. A wire is then attached to the metal electrode and passed through the closed end of the glass envelope. The closed end is sealed into the end of the sign tubing with the open end protrusion inserted into the tube.

The high-voltage electricity required is obtained by a transformer which – you will be surprised to know - converts 120 volts from the electrical lines to as high as 15,000 volts needed for the sign. The transformers, it must be noted, are connected to the electrodes in the sign by means of a special wire, known as GTO wire. This wire is also used to connect the individual sections of illuminated tubing in series. For safety purposes, the wire is connected to the transformer through an insulated housing made of a type of glass called borosilicate glass.

Though a mechanical process, manufacturing neon sign is a pleasant work experience. There is lot of scope for imagination and creativity as each sign is unique and must be designed bearing in mind the purpose why it is being installed and the available space for installation. The diameter of the tube, the minimum radius the tubing can be bent, and the overall length of tubing the transformer – are all the other parameters that can influence and restrict the design.

The exact step-by-step process of manufacturing Neon Signs is as follows:

• Lengths of glass tubing are cleaned and placed vertically in a coating machine which penetrates liquid phosphor suspension into the tube for eventual draining. The tubes are exposed to heat for the coating to dry. Color tints are applied in a similar manner.
  
  
• The glass tubing is gently heated and softened using a variety of burners to facilitate bending. Using the asbestos template as a guide, the tubing is bent by hand.
  
  
• Thereafter a process known as bombarding is used to remove any impurities from the glass, phosphors, and electrodes.
  
  
• Once the tube has cooled, the gas is inserted under low pressure. The tabulated port is then heated and sealed off.
  
  
• The finished gas-filled tubing is put through an aging process to allow the gas in the tube to stabilize and operate properly. A transformer, often rated slightly higher than the normal operating current, is attached to the electrodes.
  
  
• Small neon signs are mounted on their framework and wired in the shop. Larger signs may be mounted in pieces and put into place on the building or other support structure where they are interconnected and wired.

Labels: Neon Advertising Signs, Neon Business Signs, Neon Signs